Note: These types of outputs are set to be upgraded so any and all of this information may be outdated.

Raw Spectral Data

Text Formats

Raw Data- Counts per channel and regions of interest which can be automatically set by the analyzer (or omitted entirely if desired). These are normally very large files (>200k). Only one region of interest is shown here, formatted with several entries on a line.

Chn Counts ROI Chn Counts ROI Chn Counts ROI Chn Counts ROI

143, 3899, 006 144, 3923, 006 145, 3929, 006 146, 3978, 006

147, 4123, 006 148, 4312, 006 149, 4427, 006 150, 4412, 006

151, 4286, 006 152, 4114, 006 153, 3991, 006 154, 3956, 006

155, 3960, 006 156, 3961, 006 157, 3970, 006 158, 4004, 006

This data is followed by region of interest computations for each region; only region 6 is given here.

ROI:  06 Beg: 0143 Chn 71.48 keV   End: 0158 Chn 78.98 keV

Ctrd: 149.36 Chn     74.66 keV

Fwhm:   4.20 Chn      2.10 keV

Gross Integral: 65245 cts     Net Integral: 2002 cts

Regions of Interest

(set up by analyzer to include all peaks) This file presents exactly the region of interest data included in the Raw data file above. (These too are long files, but about 800 lines shorter than the raw data because data for each channel is not included.)

Peak Report

This file has an entry for each peak located in the spectrum. The example here shows only the headings and region 6.

PN     CTRD keV    FWHM keV  Net Area Backgrnd   Net C/S    %Err

06      74.66       2.10         2002    63243     0.570   24.18

NAA Report Formats

.PRN File Format

This is a short portion of a text file formatted NAA report which can be viewed or printed. The NAA reports include only photopeaks selected by the analyst. Order is alphabetic by element symbol.

Standard 250.52 mgm 1.418E+06 sec decay 2.44%DT Flux= 9.734E+12

El  E(keV) DeltaE  PkWdth  Cnts/sec    %SD   Micro-gm      PPM

Ag  765.3   1.49    11     3.34E-01  24.44  4.007E+00   1.600E+01

Ce  145.0  -0.50    17     1.43E+01   1.53  1.049E+01   4.187E+01|

Co 1172.9  -0.30    18     3.48E+00   1.99  9.092E+01   3.629E+02|

CDL file.

This is a short portion of the comma and " delimited flat text file which can be imported to most database or spreadsheet programs. Fields are separated by commas, and text is enclosed in "". It includes the same information shown immediately above, but the heading information is repeated at the beginning of each line. The lines are wider than the screen for most viewers, so each line is broken and a blank line is placed before each entry to show the extent of each data line.

"Sample Ident","Wt (mgm)","Sec Decay","DT(%)","Flux","El","E(keV)","Delta E","Pk Wdth","Cnts/sec","%SD","Micro-gm","PPM"

"standard",250.52,1418400,2.444444,9.73431E+12,"Ag",765.2869,1.486877,11,.333713

,"24.44",4.007333,15.99606," "



"standard",250.52,1418400,2.444444,9.73431E+12,"Ce",145.0022,-.497757,17,14.2625

3," 1.53",10.48833,41.86622,"|"



"standard",250.52,1418400,2.444444,9.73431E+12,"Co",1172.9,-.3000488,18,3.482916

," 1.99",90.91711,362.9136,"|"